We can also provide all parts of feed mixer
Feed mixing knife maintenance knife for vertical TMR mixing auger
It is a good idea to regularly check the knives in the food feeder for wear. Damaged or worn tools can cause high unexpected costs. Even so, this cost is easy to avoid.
It is recommended to check the tool once a month, and replace the device every one to two years according to the working time and the performance of the feed shaft. Blunt knives can have unpleasant consequences.
We have listed the following five most important reasons and why you should regularly check the spiral knife in the feed mixer.
Sharp knives ensure better mixing.
If the feed is not cut well, it is difficult to obtain a uniform mixed diet, and it is easier for cows to choose the feed. This means that not every cow can get the required nutrition. In turn, this will damage the health of animals and ultimately affect their milk production.
The sharp spiral knife on the mixer saves fuel.
Vertical TMR mixed auger cutter
Not surprisingly, it is difficult to cut correctly with a blunt and worn knife. If the knife is blunt, the tractor will consume unnecessary power, and it will take longer to cut the feed into a well-mixed ration. This is why it is necessary to take the time to check the tools regularly and replace them if necessary.
